When a gear strips or a gearbox fails, getting the replacement part is often the real problem. Original spares may be discontinued, months away or very expensive. A capable gear-cutting workshop can make a replacement from the broken sample or a drawing — and repair the gearbox it came from.

At Global Prime Engineering in Sharjah Industrial Area 2, gear making is a core part of our machine shop. We cut gears on hobbing, shaping and milling machines, and we make and repair gearboxes for industrial and automotive applications.

Gear being cut on a milling machine in the Global Prime Engineering workshop

Gears and drive parts we make

  • Spur gears and helical gears
  • Gear shafts and pinions
  • Sprockets and chain wheels
  • Chain wheel operators for butterfly valves
  • Splined shafts and hubs
  • Keyways, internal splines and other shaped profiles

We work in carbon and alloy steels, cast iron, bronze and engineering plastics such as nylon, choosing the material to suit the load, speed and noise requirements of the drive.

How gears are cut: hobbing, shaping and milling

  • Gear hobbing: a rotating hob generates the tooth form continuously as the blank turns. Accurate and efficient for spur gears, helical gears and sprockets.
  • Shaping: a reciprocating cutting tool produces internal splines, keyways and teeth in places a hob cannot reach, such as next to a shoulder.
  • Milling with an indexing head: a form cutter mills one tooth space at a time — practical for one-off gears and large teeth.

Making a replacement gear from a broken sample

Most of the gears we make start as a worn or broken sample. We count the teeth, measure the outside diameter and tooth form to identify the module (or diametral pitch) and pressure angle, and record the bore, keyway and hub dimensions. Where teeth are badly worn, the mating gear helps confirm the original geometry. The result is a replacement that meshes correctly with your existing parts.

Tip: bring the mating gear too

If you can, send the mating gear or pinion along with the damaged one. It helps us confirm the tooth form and centre distance, and lets you decide whether to replace the pair together.

Gearbox repair and reconditioning

We make and repair gearboxes for conveyors, mixers, crushers and industrial drives, as well as automotive and heavy-vehicle applications. A typical repair includes:

  • Strip-down and inspection of gears, shafts, bearings and seals
  • Manufacture of replacement gears, shafts and bushes
  • Bearing and seal replacement
  • Re-machining of worn bearing housings
  • Reassembly, with checks for correct backlash and smooth running

Industries we support

Our gear and gearbox work supports manufacturing plants, crusher and cement plants, construction and material-handling equipment, marine operators and fleet workshops across Sharjah, Dubai and the UAE. When a production line is down waiting for an imported gear, a locally made replacement can save weeks.

Frequently asked questions

Can you make a gear from a broken sample?

Yes. Most of the gears we make are reverse-engineered from a worn or broken sample. If you have the mating gear, bring it too — it helps confirm the tooth geometry.

What information do you need to quote a gear?

Ideally a drawing, or the sample itself. Otherwise, send the number of teeth, outside diameter, face width, bore and keyway sizes, material and quantity required, along with clear photos.

Do you make sprockets and chain wheels?

Yes. We manufacture sprockets and chain wheels, including chain wheel operators for butterfly valves.

Can you repair industrial gearboxes?

Yes. We strip, inspect and repair gearboxes — replacing gears, shafts, bearings and seals, and re-machining worn housings where needed.

Do you make gears in small quantities?

Yes. We make single replacement gears as well as small batches.