Welding holds together everything from building frames and machine bases to boat fittings and cracked gearbox housings. Choosing the right process — and the right welders — decides whether a joint lasts for years or fails under load.

Global Prime Engineering provides arc (stick), MIG and TIG/argon welding from our workshop in Sharjah Industrial Area 2, covering mild steel, stainless steel, aluminium, alloys and cast iron. Our welding is backed by ISO 3834-2 certification, the international standard for comprehensive quality requirements in fusion welding.

Welding torch throwing sparks during steel fabrication

MIG, TIG and arc welding explained

  • MIG welding (GMAW): a continuously fed wire electrode and shielding gas make MIG fast and productive — ideal for fabrication, frames and general steelwork.
  • TIG welding (GTAW), also called argon welding: a tungsten electrode and argon shielding give precise, clean welds on stainless steel, aluminium and thin material, where appearance and integrity matter.
  • Arc welding (SMAW, or stick): robust and versatile, and well suited to structural steel, heavy sections and repairs.

Many jobs combine processes — for example, a TIG root pass followed by arc-welded fill passes on thicker pipe or plate.

Materials we weld

  • Mild steel (MS) and structural steel
  • Stainless steel (SS)
  • Aluminium
  • Alloy steels
  • Cast iron, including cracked housings, brackets and machine parts

Cast iron and aluminium repairs need particular care — correct pre-heating, the right filler metal and controlled cooling — to stop new cracks forming next to the weld. These are the jobs where experience pays off.

Why ISO 3834-2 certification matters to you

ISO 3834-2 sets comprehensive quality requirements for fusion welding of metallic materials, covering welder qualification, welding procedures, materials, inspection and record keeping. For contractors, consultants and plant owners in the UAE, working with an ISO 3834-2 certified workshop means welding is carried out under a controlled, documented system rather than left to chance.

We also hold ISO 9001, ISO 14001 and ISO 45001 certifications, covering quality, environmental and occupational health and safety management.

Welding services we provide

  • Structural steel welding for frames, platforms, staircases, mezzanine floors and shades
  • Repair welding of machine parts, brackets, buckets and housings
  • Stainless steel and aluminium fabrication
  • Marine engineering support, including ship components and offshore structures
  • Heavy vehicle axle repair, with straightening and welding
  • Weld repair of worn shafts and components, re-machined to size on our lathes

Our welding workflow

  1. 1

    Assess

    We review the drawing or inspect the damaged part to understand the material, the loads and the service conditions.

  2. 2

    Plan

    The welding process, filler metal and procedure are selected, including pre-heat and cooling requirements for cast iron and alloys.

  3. 3

    Prepare

    Joints are cleaned, bevelled and set up so that the weld penetrates and fuses properly.

  4. 4

    Weld

    Qualified welders carry out the work to the agreed procedure.

  5. 5

    Inspect and finish

    Welds are inspected, then ground or machined where a finished surface or a precise dimension is needed.

Frequently asked questions

What is the difference between MIG and TIG welding?

MIG uses a continuously fed wire and is faster, which makes it ideal for fabrication and thicker steel. TIG uses a tungsten electrode with separately added filler, giving more precise, cleaner welds on stainless steel, aluminium and thin material.

Can you weld aluminium and stainless steel?

Yes. We TIG (argon) weld aluminium and stainless steel, and we also fabricate assemblies in both materials.

Can cracked cast iron be welded?

Often, yes. The result depends on the condition of the casting and where the crack is. With correct pre-heating, filler and controlled cooling, many cast iron housings and machine parts can be repaired. We inspect the part first and advise honestly.

What does ISO 3834-2 certification mean?

It certifies that a workshop meets comprehensive quality requirements for fusion welding — covering procedures, welder qualification, inspection and records — which gives you confidence in the consistency of the welding.

Do you weld and fabricate for projects in Dubai?

Yes. We weld and fabricate in our Sharjah workshop, a short drive from Dubai, for customers across Dubai, Sharjah, Ajman and the rest of the UAE.