Hydraulic cylinders do the heavy lifting on excavators, loaders, cranes, tippers, presses and industrial machinery. When a cylinder leaks, drifts or loses power, the whole machine stops earning — so fast, reliable repair matters.
Global Prime Engineering services and manufactures hydraulic equipment at our workshop in Sharjah Industrial Area 2. With a hydraulic cylinder pressure-testing machine, a 400-ton hydraulic press and a full machine shop on site, we can strip, repair, re-machine and test cylinders under one roof.

Signs a hydraulic cylinder needs repair
- Oil leaking past the rod seal or from the gland
- The cylinder drifting or creeping under load, usually from internal leakage past the piston seal
- Slow, jerky or weak movement
- A scored, pitted or bent piston rod
- Worn or damaged mounting eyes, pins and bushes
Ignoring a leaking seal usually makes the repair more expensive. Grit and contaminated oil damage the rod and the barrel, turning a simple reseal into a re-machining job.
Our hydraulic cylinder repair process
- 1
Strip-down and cleaning
The cylinder is dismantled and every component cleaned.
- 2
Inspection and measurement
The rod is checked for straightness and surface damage, the barrel bore for scoring and wear, and the piston, gland and seal grooves for damage.
- 3
Repair and machining
Bent rods are straightened on our 400-ton hydraulic press where possible, and components are re-machined on our lathes. Glands, pistons, bushes and pins are made new when required.
- 4
Resealing
New seals are fitted to suit the cylinder’s working pressure and application.
- 5
Pressure testing
Repaired cylinders are pressure-tested on our hydraulic cylinder testing machine to confirm they hold pressure without leaking before they leave the workshop.
Hydraulic services we provide
- Hydraulic cylinder repair and resealing
- Manufacturing of new hydraulic cylinders and cylinder components
- Piston rod straightening and replacement
- Glands, pistons, bushes, pins and end fittings made to size
- Hydraulic press maintenance and repair, including presses up to 400 tons
- System diagnostics and preventive maintenance
Who we work with
Our hydraulic work supports construction and earth-moving contractors, logistics and fleet operators running tippers and tail-lifts, marine operators, manufacturing plants with presses and production machinery, and government departments maintaining their equipment across Sharjah, Dubai and the UAE.
How to extend the life of your hydraulic cylinders
- Keep the hydraulic oil clean and change filters on schedule
- Protect exposed rods from impact and corrosion, and keep them clean on dusty sites
- Check for leaks and drift during routine maintenance
- Avoid side-loading cylinders beyond their design
- Repair small leaks early, before they damage rods and barrels
Frequently asked questions
Can a bent hydraulic cylinder rod be repaired?
Often, yes. Depending on the bend and the condition of the rod’s surface, it can be straightened on our hydraulic press. If it cannot be saved, we can make a replacement rod.
Do you pressure test hydraulic cylinders after repair?
Yes. We have a dedicated hydraulic cylinder pressure-testing machine to check repaired cylinders for leaks before they are returned.
Can you manufacture a new hydraulic cylinder?
Yes. Hydraulic equipment manufacturing is part of our service — we can build new cylinders and components to drawing or based on an existing unit.
How long does a hydraulic cylinder repair take?
It depends on the cylinder’s size, the damage found and the availability of seals. We confirm a timeline after inspection and prioritise breakdowns where we can.
Do you repair cylinders from excavators, cranes and tippers?
Yes. We repair hydraulic cylinders from construction and earth-moving equipment, cranes, tippers and industrial machinery.